Top 10 Volcano Hotend Cooling Block

0

Nowadays, there are so many products of volcano hotend cooling block in the market and you are wondering to choose a best one.You have searched for volcano hotend cooling block in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings volcano hotend cooling block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

601 reviews analysed

1. All Metal Hotend with Slotted Cooling Block for Wanhao i3

All Metal Hotend with Slotted Cooling Block for Wanhao i3

Feature

Description

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

2. All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm

All Metal Hotend with Slotted Cooling Block for Wanhao i3,0.4mm

Feature

Description

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

3. Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm

Micro Swiss All Metal Hotend with Slotted Cooling Block for Duplicator 6 / Monoprice Maker Ultimate 3D Printer .4mm

Feature

Description

This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

4. Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit

Feature

5. Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle

Feature

Description

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

6. Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.5mm Nozzle

Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.5mm Nozzle

Feature

Description

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

7. Aibecy 24V Assembled Hotend Extruder Kit with 0.4mm Nozzle Aluminum Heating Block 3D Printer Parts Compatible with Creality Ender 3 Ender 3 Pro 3D Printer

Aibecy 24V Assembled Hotend Extruder Kit with 0.4mm Nozzle Aluminum Heating Block 3D Printer Parts Compatible with Creality Ender 3 Ender 3 Pro 3D Printer

Feature

Description

Features:
This extruder set is compatible with Creality Ender 3, Ender 3 Pro and other 3D printers.
Mainly including 2 fans, fan cover, heat block, cooling block, nozzle, throat pipe, connector, cable, tube, etc.
Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F.
Nozzle and tube connect seamless, prevent material leaking and blocking. Heating tube, 24V 40W.
Durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.

Specifications:
Main Material: Aluminum & Stainless Steel & Brass
Nozzle Size: 0.4mm(Brass)
Heating Tube: 24V 40W
Aluminum Heat Block: 20 mm * 20 mm * 10 mm
Fits For: Compatible with Creality Ender 3, Ender 3 Pro
Package Included: (Nozzle+Fans+Fan Cover+Heat Block+Cooling Block+Throat Pipe+Connector+Cable+Tube,etc)
Operating Temperature Range: -40 ~ +260°C (-40 ~ +500 °F)
Package Size: 13.7 * 11.5 * 7.9cm / 5.4 * 4.5 * 3.1in
Package Weight: 241g / 8.5oz

Package List:
1 * Extruder Kit

 

8. Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)

Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)

Feature

Description

Size:Standard

This E3D Silicone Sock is a perfect way to keep your HotEnd clean and neat. This will fit the E3D V6 HotEnd or other V6 Style Hotends that are based on the E3D V6 HotEnd. The sock clips right onto the HotEnd with no disassembly needed and prevent failed prints from sticking to the heater block or melting over the thermistor wires. Failed prints can lead to major extrusion problems, sometimes full replacements of HotEnds. These Silicone socks help prevent these issues by adding a layer of protection over the HotEnd which makes it easier for the filament to fall off the heater block. They can also help insulate the HotEnd a bit which helps keep the heat in. This can speed up warm up times and help keep a consistent heat while printing. Three (3) Socks are included in this purchase. The outer dimensions of each individual sock is 25mm x 18.5mm x 14mm (.99in x .73in x .54in).

9. WINSINN High Speed 3D Printer Nozzle, Compatible with E3D Volcano V6 J-Head Hotend Extruder – Sensor Heater Block for PT100 1.75mm

WINSINN High Speed 3D Printer Nozzle, Compatible with E3D Volcano V6 J-Head Hotend Extruder - Sensor Heater Block for PT100 1.75mm

Feature

Description

The Sharp Nozzle + Standard & Sensor Heater Block for Volcano Upgrade..

►Heater Block: Standard + Sensor Version, Fit for PT100

►️Nozzle Material: High quality Stainless steel + Brass

►Nozzle Size: 0.4mm

►For 1.75mm Filament, Nozzle Ensure Concentricity and Roundness

———————————————————————————————————————

Package include:
►1 x Standard Volcano Heater Block
►1 x Volcano Heater Block
►5 x Volcano 0.4mm Stainless steel Nozzle
►5 x Volcano 0.4mm Brass Nozzle

———————————————————————————————————————

Product Warranty:

-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.

10. Titanium V6 heatbreak V2.3 by 3D passion (1.75mm, All-Metal, Our in-House New Design), 2-Pack.

Titanium V6 heatbreak V2.3 by 3D passion (1.75mm, All-Metal, Our in-House New Design), 2-Pack.

Feature

Description

Size:2-pack

It is my own heatbreak design. 2x better thermal barrier performance vs E3D heatbreak. It is not a clone, geometry is different – see second photo for details. I reworked geometry and improved tolerances and features. Search terms: V6 heatbreak, E3D V6 Heatbreak, V6 Titanium Hetbreak, V6 hotend titanium throat.

Conclusion

By our suggestions above, we hope that you can found Volcano Hotend Cooling Block for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general