637 reviews analysed
1. Valemo VDM10, Spring Return Damper Actuator & Motor, Replacement Damper Motor Actuator for Honeywell ARD ZD M847D & Similar Actuators, 24VAC, No Switch
- Spring return damper actuator are designed to be used as replacement for Honeywell’s M847D, M847D1004 & similar HVAC damper actuators.
- Quality tested for over 150K cycles for flawless operation. Heavy-duty motor with all METAL gears.
- VDM10 HVAC damper motor can be used in either Normally Open (NO) or Normally Closed (NC) installations.
- Power: 24 VAC, 50/60 Hz, 6W, 0.36A | Opening/Closing Force: 0.22 N.m (2 Lb-In)
- Installation: Direct coupling to 5/16″ damper shaft, works well on both NO and NC dampers.
The Valemo VDM10 and VDM10B Spring Return Damper Actuators are designed to be used as replacements for Honeywell’s M847D, M847D1004 & similar HVAC damper actuators.
2. Replacement Damper Motor Actuator for Honeywell ARD ZD M847D 2 Wire Spring Motor RZ3-1M
- *Torque is consistently delivered throughout the full 90 degree rotational operating range to open and close the damper, and irrespective of whether the actuator is operating in Power Advance Mode (energized) or Spring Return Mode (de-energized).
- *The energized actuator may be stalled at any angular position and remain energized indefinitely.
- *When de-energized, the actuator consistently returns the damper shaft to home position, whether or not the starting spring return position is a full 90 degrees or any intermediate position.
- *Extremely reliable. Statistical life reliability exceeds 120,000 cycles at 90% reliability and 100% confidence with no decay in delivery torque over life of the actuator.
- *Very quiet operation typically 40dB, or less at 3 feet. These motors offer: Less Cost Better Quality Full 1 Year Warranty
3. Replacement Damper Motor Actuator for Honeywell ARD M847D 2-Wire Spring Return – Trol A Temp, Zonefirst
- 2-Wire Spring Return Actuator 24V with durable gears, and easy to remove black plastic covers.
- Replacement for Honeywell M847D1004, M847D1012, and all Honeywell M847D Series Motors for ARD dampers.
- Replacement for Retrozone Replacement Damper Motor Actuator for Honeywell ARD M847D 2 Wire Spring Motor RZ3-1M 680474058020.
- Zonefirst replacement models ZDS, ZDB, and RTS.
- For use with dampers that are normally open, as used with Honeywell and Trol-a-Temp zone control systems.
Drop-in replacement motor actuator for Honeywell M847D1004, M847D1012, and all Honeywell M847D Series Motors for ARD dampers, RZ3-1M 680474058020. Zonefirst rmodels ZDS, ZDB, and RTS. For normally open, as used with Honeywell and Trol-a-Temp zone control systems. Better than the original motors! Easy to install, quiet solid construction guaranteed.
4. Honeywell EQ-ZV24 Zone Valve Synchron Motor
5. Johnson Controls M9102-IGA-3S Series M9102 Non-Spring Return Damper Actuator, M3 Screw Terminal, On-Off Floating Control W/Timeout, 18 Torque, 50/60 Hz, 24VAC
6. Braukmann M847D-VENT Truezone Replacement Actuator – Ventilation (Normally Closed) – For Eard Ventilation Dampers
7. Honeywell 802360JA Motor
8. Valemo MD10 – Replacement for Honeywell 802360JA Motor used in V8043-V8044, 24 VAC zone valve
9. Honeywell M847D motor replacement kit to Belimo 3 wire motor
- Stop replacing those troublesome Honeywell Spring return motors! This Honeywell to Belimo retrofit kit allows you to easily replace the Honeywell M847D motors with the powerful commerical grade Belimo 3 wire motor, complete with the custom adapters and hardware for your damper.
- 5 year factory warranty, satisfaction guaranteed or your money back!
- Works with Round or rectangular dampers, any damper with a 3/8″ or smaller shaft
- Works with any panel, Honeywell and others with a 3 wire damper output
- Also works on many zone panels with a 2 wire damper output
By our suggestions above, we hope that you can found Honeywell Actuator M847d1004 for you.Please don’t forget to share your experience by comment in this post. Thank you!