Top 9 Ge Cirtcuit Breakers

Product Description

GE, 100a, double pole circuit breaker, 240V, bulk. The product is good to use. Manufactured in china.

From the Manufacturer

This 120/240-Volt GE 100 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding sub-feed panel boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

1 Pole, 20 Amp;Type THQL for use in General Electric load centers;Thick series, requires one 1-inch space

Product description

GE THQL21125 Plug-In Mount Type THQL Feeder Molded Case Circuit Breaker 2-Pole 125 Amp 120/240 Volt AC

From the Manufacturer

This 120/240 volt GE 125 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

Single pole ground fault circuit interrupter circuit breaker. Type THQL, 1″ module. 120 240V. UL listed. No. THQL1120GF: 20A No. THQL1130GFP: 30A

Product Description

Siemens Q2020 Two 20-Amp Single Pole 120-Volt Circuit Breakers, for use only where Type QT breakers are allowed

From the Manufacturer

Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The duplex breakers provide two single pole breakers in the space typically required for only one standard breaker. These duplex, 1/2-Inch frame breakers are ideal when new circuits are required in a panel that has no available spaces.

Product Description

GE, 15a, single pole circuit breaker, 1/2 inch per pole, 120V, bulk. The product is good to use. Manufactured in china.

From the Manufacturer

This 120 volt GE 15 amp, single pole, thin series replacement circuit breaker is used in a General Electric load center. This breaker provides two circuits in the space of one. Typical applications, up to 1,800 watts, include fixed lighting circuits, branch circuits, wall receptacles, electric motors (1/4 hp to 1/2 hp), attic fans and garbage disposals. These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

‘Unit Mount Circuit Breaker, Circuit Breaker Type Standard, Number of Poles 2, 60 Amps, AC Voltage Rating 120/240VAC, DC Voltage Rating Not Rated, Max. AIR Rating 10kA, Phase 1, Terminal Connection Lug, Series THQC, Min. Wire Size 8 AWG, Max. Wire Size 3 AWG, Length 3.28 In., Width 2.00 In., Depth 2.38 In., Standards UL Listed’