The Best Dash Cam Power Obd

0
792 reviews analysed

1. OBD2 OBD Power Cable for Dash Camera, Ssontong OBD to Mini USB OBDII Adapter Hardwire Charger Cable 24 Hours Surveillance and Acc Two Mode

OBD2 OBD Power Cable for Dash Camera, Ssontong OBD to Mini USB OBDII Adapter Hardwire Charger Cable 24 Hours Surveillance and Acc Two Mode

Feature

2. Vantrue 10ft Type C USB OBD Hardwire Charger Cable for Vantrue N4 Dash Cam and Other Type C USB Power Port Dash Cams

Vantrue 10ft Type C USB OBD Hardwire Charger Cable for Vantrue N4 Dash Cam and Other Type C USB Power Port Dash Cams

Feature

Description

Vantrue N4 obd cable

3. Nexar Beam Full HD 1080p Dash Cam | New 2020 Model | 32 GB SD Card Included | WiFi | Unlimited Cloud Storage

Nexar Beam Full HD 1080p Dash Cam | New 2020 Model | 32 GB SD Card Included | WiFi | Unlimited Cloud Storage

Feature

4. APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras

APEMAN Dash Cam Hardwire Kit for C450 Series A, DC 11.5V-40V to 5V Car Charger Power Kit, Build-in G-Sensor and Low Voltage Protection for Dash Cameras

Feature

Description

APEMAN Hardwire Kit for Mini USB Dash Cam APEMAN C450 Series A

It’s a must-have if you need 24/7 parking guard with your dash cam. It connects the camera directly to the OBD-II connector of your car under the dash cam for continuous power from the vehicle’s battery. When the car is driving, it can be used replacing the ordinary car charger, and the car ignition will not be powered off.

APEMAN Hardwire Kit is specialized for APEMAN’s Star Dash Cam – C450 Series A or other Mini charging port car recorder.

Specifications:
★ Connector: Mini USB
★ Input Voltage Range: 11.5V-40V
★ Output: 5V /1.5A
★ Working Temperature:-10-60℃
★ Cable Length: 3M
★ Low Voltage Protection: When voltage lower than 11.5, automatically cut off the power

Installation Instruction:
1.Mount your camera where it has full vision of your road
2.Run the wiring towards to the OBD-II connector of your car
3.Hide the wire under the headboard
4.Remove the 3M Sticker of the G-sensor on hardwire kit, then firm to the windshield where close to dash cam.
5.Connect the hardwire kit with the dash cam and power the camera for using.

Warm Tips:
★ If you don’t have experience on installing the hardwire kits for the dash cam, please ask to APEMAN Customer Team for professional help, we are always here to serve you.

5. Anker Roav 6 ft USB Hardwire Kit, 24/7 Parking Mode, Low Voltage Protection, 12V-30V, Easy Installation Into Vehicle OBD, Compatible with Roav DashCam Duo

Anker Roav 6 ft USB Hardwire Kit, 24/7 Parking Mode, Low Voltage Protection, 12V-30V, Easy Installation Into Vehicle OBD, Compatible with Roav DashCam Duo

Feature

Description

6 ft USB Hardwire Kit
Hardwire kit for dash cameras

From Roav—Making the Smart Driving Experience Accessible to All
A collection of connected devices that enhance your driving experience.
Created by the same team as Anker—renowned for exceptional quality and innovation.

Power On, Always
Deliver a constant supply of power to your dash camera or any other connected USB device, even when your engine is switched off.

Parking Mode Activated
Required for use of DashCam Duo’s Parking Mode. Once connected using the hardwire kit, DashCam Duo keeps an eye on your vehicle 24 hours a day. If sudden movements are detected, the built-in gravity sensor activates the camera to record the situation.

Effortless Installation
Unlike a traditional hardwire kit, there’s no need to mess around with fuses and wires. Simply plug the hardwire kit directly into your car’s OBD-II port for a continuous source of power.

Superior Safety
Built-in safety features protect your devices against overheating and current overload, while also automatically cutting off power to the dash cam when your vehicle’s battery voltage is running low.

An Extra Boost
If your mobile device is low on power, simply connect it up to the hardwire kit’s USB port for an emergency charge.

6. Conecta BlackVue Dash Cam OBD Power + Parking Mode Cable for Easy Hardwire Installation

Conecta BlackVue Dash Cam OBD Power + Parking Mode Cable for Easy Hardwire Installation

Feature

Description

The BlackVue Dash Cam Power & Parking Cable is the quickest and simplest way to power your BlackVue dash cam directly from the vehicle’s electrical system, without a visible cable or the complicated and time consuming task of wiring directly to the fuse box. Additionally the OBD Power & Parking Cable will provide Parking Mode functionality at the flick of a switch, meaning that your BlackVue dash cam can continue recording after the ignition has been switched off and you are not around. Simply plug into your vehicle’s OBD II port and connect to your BlackVue dash cam, before tucking the cable out of sight around the dashboard and head lining for a tidy and discreet installation. The BlackVue Dash Cam Power & Parking Cable has in-built car battery protection, meaning that your dash cam will never be allowed to run down your vehicle’s battery.

7. Dash Cam Front and Rear CHORTAU Dual Dash Cam 3 inch Dashboard Camera Full HD 170° Wide Angle Backup Camera with Night Vision WDR G-Sensor Parking Monitor Loop Recording Motion Detection

Dash Cam Front and Rear CHORTAU Dual Dash Cam 3 inch Dashboard Camera Full HD 170° Wide Angle Backup Camera with Night Vision WDR G-Sensor Parking Monitor Loop Recording Motion Detection

Feature

8. 【2 Pack】 OBD Power Cable, Mini USB Port OBD2 Power Cable for Dash Camera 24 Hours Surveillance/Acc Mode with Switch Button, 16Pin OBDII Adapter Hardwire Charger Cable 12-26V to 5V

【2 Pack】 OBD Power Cable, Mini USB Port OBD2 Power Cable for Dash Camera 24 Hours Surveillance/Acc Mode with Switch Button, 16Pin OBDII Adapter Hardwire Charger Cable 12-26V to 5V

Feature

Description

What do you want to known about our obd power cable:
Q: Can this obd cable only be used for cars?
Answer: Of course not! all are universal, Cars or Vans or others, as long as they have an obd port.

Q: What is the length of the obd2 cable line?
Answer: 3.5m (11.5FT), suitable for driving recorders in big/small cars or other car device.

Q: About voltage to current conversion
Answer: Input: 12v-26v Output: 5V/2.1A.

Please note:
1. When the customer just inserted the OBD into the car, no matter which mode the OBD chooses at this time, there is output .
Because this process is the process of the OBD program chip starting detection, it will be normal after 5 minutes.
Mode I It will continue to work, Mode II will be powered off.

2. About 5 minutes delay setting explanation:
Because the car’s air conditioner, headlights, wiper, etc. will use the car’s battery voltage during the driving process. The voltage of the car’s battery is unstable and fluctuates up and down. Avoid When there is a voltage fluctuation, the detection voltage is lower than our 13V detection point, which causes the OBD to be frequently powered off, so a delay of 5 minutes is cut off for all.

Package:
2 * OBD2 Cable for Dash cams
1 * User Manual

About Biuone :
Biuone means happiness and safety. As a customer-centric seller, we bear “Biuone” in mind in our daily operation, offering a wide selection of car parts that are compatible with most popular brands in the North American markets;

All parts and accessories sold by Biuone are manufactured according to strictest industry standards, superior functionality and premium quality assured. Thank you for visiting our products and store and happy shopping!

You can EMAIL us according user manual’s contact information.

9. REARMASTER Universal OBD Power Cable for Dash Camera,24 Hours Surveillance/Acc Mode with Switch Button

REARMASTER Universal OBD Power Cable for Dash Camera,24 Hours Surveillance/Acc Mode with Switch Button

Feature

Description

Color:mini-usb

Working Mode:

Mode “O”:
ACC mode, when your car ACC is off, the OBD power cable will also power off after 5 minutes.

Mode “—”:
Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage),it will power off after 30 seconds.
The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving.

Attention:

1. Please note that the OBD power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. With the step-down function, the voltage will be converted to 5V output.
2. Please make sure you have installed the OBD adaptor and hiding the cable perfectly, in case of affecting your driving for safety.
3.Due to some cars interface protection mechanism,some of the car models may not work properly with the cable, this is a compatibility issue instead of quality issue.If your car can not work with the cable, please contact us for 100% refund.

Spec:

ACC mode Input: 13V-36V | Output: 5V/2.1A
Surveillance mode Input: 11.6V-36V | Output: 5V/2.1A
Extension cable: 3.5meter(11.5 ft) length
Interface: mini USB

10. REARMASTER Universal OBD Power Cable for Dash Camera,24 Hours Surveillance/Acc Mode with Switch Button

REARMASTER Universal OBD Power Cable for Dash Camera,24 Hours Surveillance/Acc Mode with Switch Button

Feature

Description

Color:micro-usb

Working Mode:

Mode “O”:
ACC mode, when your car ACC is off, the OBD power cable will also power off after 5 minutes.

Mode “—”:
Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage),it will power off after 30 seconds.
The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving.

Attention:

1. Please note that the OBD power cable is only working for dash cams which range from 8V-36V,other voltage range is not supported. With the step-down function, the voltage will be converted to 5V output.
2. Please make sure you have installed the OBD adaptor and hiding the cable perfectly, in case of affecting your driving for safety.

Spec:

ACC mode Input: 13V-36V | Output: 5V/2.1A
Surveillance mode Input: 11.6V-36V | Output: 5V/2.1A
Extension cable: 3.5meter(11.5 ft) length
Interface: micro USB

Conclusion

By our suggestions above, we hope that you can found Dash Cam Power Obd for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general